Blog

A. Adopting the microcomputer control system to improve the predecessors, the function is not chaotic;B. The conveyor automatically feeds the billet;C, using infrared lamp heating, strong penetrating power, preform rotation and heating, track revolution, heating average, fast and reliable;D. The width and height of the lamp tube and reflector in the...

1. The main components of the blowing machine are maintained. It mainly includes a series of environmental protection parts such as moisture-proof and anti-corrosion of electronic control components, convenience of switching between lines, stability protection, stable operation of circuit working voltage and current, and compliance with regulations;...

1. The screw central shaft and cylinder are made of 38CrMoAlA chromium, molybdenum and aluminum alloy by nitrogen treatment, which has the advantages of high thickness, corrosion resistance and wear resistance.2. The die is chrome-plated, and the screw mandrel structure makes the discharge smoother and smoother, and the blown film is better complete...

The energy saving of a blow molding machine can be divided into two parts: one is the power part and the other is the heating part.Power saving: Most of the inverters are used. The energy saving method is to save the residual energy of the motor. For example, the actual power of the motor is 50 Hz, and you only need 30 Hz in production to produce en...

Packaging design plays an important role in the success of your product. A catchy packaging design not only attracts a potential buyer but also influences his/her decision. To make your water bottle successful in this crowded market, you need to come up with a unique and interesting bottle design that nudge your prospects to give your product a big ...

Blow molding, also known as hollow blow molding, is a rapidly evolving plastic processing method. The tubular plastic parison obtained by extrusion or injection molding of thermoplastic resin is heated (or heated to a softened state), placed in a split mold, and compressed air is introduced into the parison immediately after closing the mold to blow...

Blow molding machines can be divided into three categories: extrusion blow molding machine, injection blow molding machine and special structure blow molding machine. Stretch blow molding machines can be assigned to each of the above categories. The extrusion blow molding machine is a combination of an extruder and a blow molding machine and a mold ...

Blow molding machines, also known as hollow blow molding, are a rapidly evolving plastic processing method.A blow molding machine is a machine that produces a product after the liquid plastic is sprayed out, and the wind is blown out by the machine to blow the molded body to a cavity of a certain shape. The plastic is melted and quantitatively extru...

The positioning rack is balanced and positioned, the front, middle and rear three templates, the double crank arm linkage mechanism, and the mold clamping cylinder. The cylinder is driven by the electromagnetic directional control valve to drive the linkage crank arm to open and close the mold. The structure design is reasonable, the work runs smoot...

Let me tell you the specific reasons and solutions. The poor transparency of the bottle blowing machine is nothing more than the following situations: 1. The heating temperature is too high, 2. The heating time is too long, 3. The compressed air contains water. 4. The injection embryo tube itself is opaque (you need to find the reason from the injec...