Maintenance method of plastic hollow blow molding machine


1. The main components of the blowing machine are maint […]

1. The main components of the blowing machine are maintained. It mainly includes a series of environmental protection parts such as moisture-proof and anti-corrosion of electronic control components, convenience of switching between lines, stability protection, stable operation of circuit working voltage and current, and compliance with regulations; part lubrication of components, load-breaking and tightening between screw columns Maintenance; stability of the hydraulic system, component renewal, working and storage temperatures, and maintenance of dust cleaning.
2. Maintenance of other related components. Mainly there are electric heating line connection and cleanliness maintenance around the material pipe; the operating environment temperature and oil pressure of the cooler and the cleaning problems under the waiting of the industry.
3. The base is used and operated. The operator should completely align the nozzle and the inlet of the device to prevent accidental damage to the heating sheet, heating wire, and material resources.
In addition to the above items for the heat fixing and cleaning of the electric circuit, the following daily maintenance is required in the process of using the blowing machine: temperature system check, normal operation check of the engine system, cylinder pressure check, raw material purity check, power failure Preventive inspection of safety hazards such as electric leakage.
For the maintenance and troubleshooting of the blow molding machine, it is necessary to pay more routine inspection and maintenance to prevent the emergency from being able to clear the source in time, and to prescribe the right medicine; when the fault occurs, the power should be cut off reasonably and the operation should be stopped; Report, do retroactive, refer to a division. In addition, it is necessary to equip or be able to find professionals to timely check, maintain, operate and repair the equipment, so that the root cause can be quickly and effectively found, the emergency situation can be handled, the role of the blow molding machine can be utilized, and the overall efficiency can be improved.