News -

Home / News (Page 2)

About the compression ratio of the air compressor?
22-03-2021
(Pressure ratio, pressure ratio) Ⅰ Internal compression ratio (ie internal pressure ratio) The ratio of the final pressure (absolute pressure) of the gas after internal compression to the initial pressure (absolute press...
How to clean the air compressor?
15-03-2021
Long-term operation of the air compressor will cause the equipment to be blocked by scale, which will reduce the efficiency, increase the energy consumption and shorten the service life. If the scale cannot be removed in...
Where to install the air compressor?
08-03-2021
1. When installing the air compressor, a wide and well-lit place is required to facilitate operation and maintenance. 2. The relative humidity of the air should be low, with little dust, and the air should be clean and w...
How is the control principle of an air compressor?
01-03-2021
The control of air compressor noise mainly adopts three aspects: muffler, silencing tunnel and sound insulation technology: Install the muffler The main noise source is the intake and exhaust ports, and appropriate intak...
What is the solution for the pearly luster and whitening of the PET bottle during the blowing process?
22-02-2021
In the blowing process, we often find this kind of problem, the PET bottle body appears pearl-like luster and whitening, what is the cause and the solution Causes of pearl luster and whitening during PET bottle blowing: ...
How to describe the mold appropriately?
18-02-2021
1. Retry the mold and appropriately change the skill conditions and slightly modify the shortened value to meet the needs of the blow molding box. 2. Modify the mold according to the shortened practice. 3. Take a smaller...