How to use the automatic bottle blowing machine. The bo […]
How to use the automatic bottle blowing machine. The bottle blowing machines on the market are usually divided into two types: full-automatic bottle blowing machine and semi-automatic bottle blowing machine.
The automatic bottle blowing machine combines the two operations of bottle blowing through the operation of the manipulator, which avoids the process of putting the preheated bottle blank (embryo) into the blowing mold manually by the center. Greatly increase the speed of immediate production, of course, the offer is higher than the semi-active.
Automatic bottle blowing machine; operation process:
Process 1. Place the full-automatic bottle blowing machine embryo in the embryo container, and enter the embryo positioning equipment actively through the transportation equipment.
Process 2. Load the full-automatic bottle blowing machine bottle embryo upward to the bottle embryo holder, and then send it to the drying tunnel.
Process 3. After the automatic bottle blowing machine is heated, the bottle embryo is sent to the blowing and drawing channel, and then the mold is locked, successively blown and pulled by low pressure, blown and pulled by high pressure, exhausted, and finally opened.
In process 4, the bottle forming of the automatic bottle blowing machine is taken down from the bottle blowing channel by the active demoulding system.
Features of automatic bottle blowing machine:
1. The full-automatic bottle blowing machine is equipped with oil-free air bag mold locking skills, with large mold locking force and no mold expansion. The double crank joint is used for less force, no wear, long service life and other advantages
2. The full-automatic bottle blowing machine adopts the sealing flying out skill to make the sealing and wide mouth bottle mouth sealing simpler without deformation.
3. The automatic bottle blowing machine is controlled by PLC computer and displayed on the touch screen, which is simple, reliable and stable.