1. The pressure of the sealing cylinder is enough. If t […]
1. The pressure of the sealing cylinder is enough. If the low pressure sealing cylinder is selected, the low pressure can be kept below 8 kg. Normal water bottles are no problem. But it also depends on the high-pressure blowing pressure. If the high-pressure blowing pressure is too high, the sealing cylinder will be pressed down. If the high-pressure pressure is reduced, it can be blown into a bottle. Try to reduce the high-pressure pressure, or if the high-pressure pressure is too high, the clamping pressure If it is too small, it will spread the mold and cause the seal to leak. The automatic clamping pressure can be increased.
2. Whether the sealing glue is damaged or aligned with the sealing part, if it deviates from the sealing part, it will leak air.
3. Whether the cylinder block or seal of the sealing cylinder is damaged, if the seal is damaged, it can be directly reflected by opening the solenoid valve of the sealing cylinder.
4. Whether the solenoid valve of the sealing cylinder is leaking or stuck or the exhaust is not smooth, these are also the reasons for the leakage of the sealing cylinder of the bottle blowing machine.