What to do if the bottle blowing machine fails during the blowing process

Update:14-12-2020
Summary:

1. When the light box waterway high temperature alarm o […]

1. When the light box waterway high temperature alarm occurs
Solution: Disassemble the rubber tube connected to the waterway, use low-pressure air and alcohol to purge and clean the waterway.
2. When a gripper failure occurs
Solution: Adjust the height of the sliding table or the position of the gripper.
3. When the action is stuck
Solution: restart the machine.
4. When the manual origin is not possible
Solution: Check whether the displacement of the first gripper, the second gripper and the variable pitch positioning plate can be stuck to the corresponding position, if not, manually make them stuck to the corresponding position, and then return to the origin.
5. When the action is not in place
Solution: Check if something is stuck. Adjust the gas flow valve.
6. When the exhaust sound is too loud
Solution: Check whether the high-pressure exhaust muffler is damaged or falling off.
7. When the embryonic duct is uneven
Solution: Adjust the position of the embryo bucket.
The above is the solution when the bottle blowing machine fails during the blowing process.

https://www.bangemachine.com/