5L super jar china bottle blowimg machine

Advantages of PET Bottle Blow Moulding Machine
1. Semi-closed heating structure, even perform heating, low reject rate.
2.  Man-Machine Interface control panel simplified operation.
3.  High pressure air recycle system, which can save about 50-60% high pressure air, and save investment for low pressure air compressor, reduce energy lost.
4.  Stable machine structure, low noise.
5. Drawer mould-fix structure facilitates mould exchange for different bottle shape.
6. Linear structure, modular design, easy maintenance.
7. The filling temperature can be up to 95ºC
PET Bottle Blow Moulding Machine is one of high-quality Blowing machines made by Bg PET Bottle Blowing Machine Supplier and Manufacturer from China.

Using advanced microcomputer control system, stable performance;
Infrared lamp tube is used for heating, with strong penetrating power, preform rotation and heating, orbital revolution, uniform heating, fast and reliable;
The width and height of the lamp tube and reflector in the heating zone can be adjusted, and the preforms of different structures are suitable for heating, and there is an automatic temperature exhaust device to ensure the constant temperature of the drying tunnel;
Each mechanical action has a safety self-locking device. When a process fails, the program will automatically switch to a safe state;
Each action is driven by an oil pump, which has the advantages of no pollution and low voice;
The air circuit design divides the action and blowing into three parts to meet the needs of different air pressures for bottle blowing and action;
Adopt high-pressure and double-curved-arm connecting rod clamping, which has strong clamping force;
The operation methods are manual and fully automatic;
The safe and reliable unique valve position design makes the gas circuit clear;
The production process is fully automated, which has the advantages of low investment, high efficiency, easy operation, simple maintenance and safety.
The bottom of the bottle is free from contamination
Cooling system to ideal cooling effect
Easy to install and start
Bottle scrap rate is less than 0.2%


合模力Clamping force15T
开模行程Clamping stroke330mm
最大拉伸Max.stretching stroke440mm
腔数Number of cavities5L 1 cavity
产量Theoretical output5L:300-500
最大膜厚Max.mould thickness320mm
模板尺寸Mould plate size490x470mm
电压Voltage standard380v/3PH/50Hzorspecoal order
功率Total power(full loaded)3-10KW 5-15KW
空压机Min.air compressor1.2mm3/min3.0Mpa
主机Blow molding machine195x60x180cm
烘箱Pre - heater180x70x140cm
净重Net weight0.9T
最大制品容量Container volume5L
瓶口尺寸Neck diameter range28-120mm
最大直径Container diameter300mm